HDD Maxi Drilling Rigs

FRONT BREAKOUT VISE 

• Max clamp force: 452,395 ‐lbs.
• Max rotating force: 150,000 ‐lbs.
• Three to Six Jaw Clamp
• Travel = 72”

REAR BREAKOUT VISE      

• Max clamp force: 301,593 ‐lbs.
• OPTIONAL: FRONT DEADMAN
• LARGE: 16 ‘ long x 5’ wide x 2’ high

HDD 500K POWER SOURCE

• Engine: Caterpillar C‐27
• Gross horsepower (max): 800 HP
• Max Engine Speed: 2100 rpm
• EPA Certification Family: Tier 2
• Fuel Type: Diesel
• Fuel Capacity: up to 1150 Gal
• Weight: 30,700 lbs. (No Fuel)
• Weight: 38,800 lbs. (Full Fuel)
• Hydraulic Tank Capacity: 450 Gal.
• Length: 20 ft.  Width: 6.33 ft. Height: 10 ft.

500K HDD HYDRAULIC SYSTEM

• Pumps
• 2 Rotary Pumps, 3 Travel pumps
• 1 Vise pump, load sensing control
• 1 Dedicated rotary flush pump
• 1 Dedicated kidney loop pump
• Thrust/Pullback Circuit
• Hydraulic Pumps: 3 ‐ Danfoss Series 90
• Travel Motors: 2 ‐ Hagglunds CA‐100
• Planetary gears: 6” tall x 15” OD
• Gearboxes: 2 ‐Seimens (Flender)P1HA14
• Rotation Circuit
• Hydraulic pumps: 2‐ Danfoss Series 90
• Hydraulic motor: 1‐Hagglunds CA‐210
• Auxiliary Circuits – Heat Exchanger / Cooler
•  Vise pump (PFC‐LS):1‐ 45 Series Danfoss – Cold oil 60 psi w/bypass

Engine emergency shutdown switches and joystick kill switches.

•    5 bank Hawe Valve Body
•    4 bank Hawe Valve Body
•     Control Kill Safety Switches

DIMENSIONS (TRANSPORT)

• Curb Weight: Approx. 70,000 lbs.
• Length: 45 ft.
• Width: 8 ft. 6 inches
• Suspension: 60,000 lb. dual axle
• Drill Rack Angle: 8 ‐ 12 degrees

OPERATIONAL

• Max Thrust: 500,000 lbs.
• Max Pullback: 500,000 lbs.
• Max Spindle Torque: 50,000 ‐lbs.
• Max Spindle Speed: 68 rpm.
• Max Carriage Speed: 70 ft. /min

Filtration Components:

• 5-25 micron charge pump filters
• 10‐10 micron high pressure filters
• 1‐25 micron flush filter, vise high pressure filter, vise return filter and kidney loop filter
• Hydraulic Reservoir
• 375 to 450 gal capacity, in tank filtration,  hot‐oil sump to separate hot and cool oil and three (3) suction strainers with shutoffs.
• Hydraulic Quick Disconnects
• Parker/Snap‐Tite

HDD 500K  BREAKOUT SYSTEM

• UPPER VISE- Dual‐cylinder design, 8 inch, integrated into Carriage to reduce breakout time.
• LOWER VISE- Three cylinder design – 8 inch, 8.75” inside diameter opening, Travel = 6 ft.
• BACK GEAR ASSEMBLY- Double beam construction.
• REAR SUPPORT PAD – 16 feet long x 7 feet 10 inches wide x 8 inches high.
• FRONT DEADMAN – SMALL- 9 feet X 6 inches Long  X 5 feet Wide X 8 inches High.

HDD 500K DRILLING CONTROL CAB

• Length: 10’  Width: 8’  Height: 8’4”
• Weight: 7020 lbs.
• Three windows with steel protective panels.
• High‐density foam insulation with Climate Controlled A/C and Heat.
• Pressure Gauges: Push, Pull and Vise Makeup, 5000 psi each, Mud Gauge -2800 psi. Sundstrand Pump Controllers.
• Torque limiter adjustment for thrust, pull back, rotary and vise‐makeup.
• Electrical Distribution Panel with Circuit Breakers.